Draw Units: These models are equipped with a stainless steel fan and motor for forced convection temperature uniformity.

Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300-1250°F. ±10°F are required. They are used for such purposes as tempering, annealing and stress relieving. 2000°F maximum temperature option is available for all models at additional cost.

Temperature controls: Auto tuning microprocessor-based controller and solid state relays for precise temperature control.

Heating elements: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates.

General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800° F block insulation. Comes complete with cord and plug.

Safety Switch: These models come equipped with dual safety switches. When the door is opened, power is disconnected from the heating elements and fan motor.

Door: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator.

A kaowool® Rope seal is installed on the door where it meets the chamber.

Unit of Measure

Chamber Width

N/A 12 in

Chamber Length

N/A 37 in

Chamber Height

N/A 8 in

Overall Width

N/A 25 in

Overall Length

N/A 62 in

Overall Height

N/A 28 in

Max. Intermittent Temperature

N/A 1250 ºF

Max. Continuos Temperature

N/A 1000 ºF

Input Power

N/A 5 kW

Weight

N/A 700 lb

Options

N/A High limit controls Stands and quench tanks