Kilns and Furnaces from Cress Manufacturing Kilns and Furnaces from Cress Manufacturing
Kilns and Furnaces from Cress Manufacturing
Kilns and Furnaces from Cress Manufacturing
About Us
Ceramic Kilns
Glass Kilns
Front Loading Kilns
Industrial Furnaces
Vent Systems
Request for Quote
Distributor Search
- Industrial
Distributor Search
- Hobby
Product Resources
Site Map

Contact Us


Search Catalog :
Use a (*) to broaden
your search results
All Categories > Industrial Furnaces > Models C336 and C444 > Item # C336/PM4  

Item # C336/PM4

List Price $40,499.00

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites

Uses: This large capacity furnace can be used for various types of heat treatment processes which require temperatures from 200°F to 1950°F. The 6 bladed axial flow fan mounted in the roof circulates the air within the chamber resulting in close gradients throughout. OPTION: 2250 rating using a 4 zone control.

Controls: Furnace is equipped with Cress Electronic Control. The control, contactor and fan motor are all completely wired ready for simple connection to your power. A limit switch is mounted on the furnace body which automatically turns elements off when the door is opened. Programmable controls and recorder are also available as an extra. A back-up control, with a separate contactor and thermocouple, is standard.

Elements: Heavy chrome-nickel wire elements are coiled and mounted in grooves in walls and door to provide all around heating which also helps produce close gradients throughout the chamber. Solid state zero voltage switching of power to elements.

General Construction: Furnace frame is constructed of heavy steel angle with 18 gauge sheet metal panels to form exterior case. Case is finished in a pleasing gray hammertone. The vertical rising door is mounted on heavy levers and is opened by lifting up on a wide handle. The counterweight holds the door up in the raised position and the weight of the door gives a good brick to brick seal in the lowered position. A Kaowool® rope seal is installed on the door where it meets the chamber. This door protects the operator from burns because the hot surface always faces away from him. Door opens manually very smoothly and easily. All walls and door are constructed of 4 1/2” of the finest quality insulating brick backed up by 1 1/2" of block insulation. The roof is arched giving added strength and providing space for fan. This combination of insulation and wall thickness helps to give fast heat up and excellent retention for economical operation.


Chamber Width

36 in

Chamber Length

36 in

Chamber Height

36 in

Overall Width

52 in

Overall Length

65 in

Overall Height

78 in

Max. Intermittent Temperature

1950 ºF

Max. Continuos Temperature

1750 ºF

Input Power

27 kW


2400 lb


480 Volt, 3 Phase
Embedding of Heating Coils In Plate

Heating Coils in Plate

Maximum Temperature 2250°F


(PDF, 12KB)