Uses: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300°F to 2250° F are required. They are used for heat treating metal, assaying and all types of testing.

Temperature Controls: Auto tuning microprocessor-based controller.

Elements: High temperature iron-aluminum alloy wire elements are coiled and mounted on the side wall in porcelain plates.

Model C136 assaying furnace has no bottom element and the side elements are raised 1.75" above the floor to prevent burnout due to spillage

General construction: Case is constructed of heavy gauge sheet steel and finished in gray hammertone. The easily operated, counter-balanced door is always away from operator. All walls and door are constructed of the finest quality insulating fire brick backed by 1800° F block insulation. Comes complete with cord and plug.

Safety switch: These models come equipped with two door safety switches. When door is opened, elements are disconnected from power source. Solid state zero voltage switching of power to elements.

Unit of Measure

Chamber Width

N/A 10.5 in

Chamber Length

N/A 13 in

Chamber Height

N/A 8 in

Overall Width

N/A 26 in

Overall Length

N/A 28 in

Overall Height

N/A 24 in

Max. Intermittent Temperature

N/A 2250 ºF

Max. Continuos Temperature

N/A 2000 ºF

Input Power

N/A 3 kW


N/A 200 lb


N/A Clean air exhaust system Dual chamber furnace Embedded elements Stainless steel port