Kilns and Furnaces from Cress Manufacturing Kilns and Furnaces from Cress Manufacturing
Kilns and Furnaces from Cress Manufacturing
Kilns and Furnaces from Cress Manufacturing
Home
About Us
Products
Ceramic Kilns
Glass Kilns
Front Loading Kilns
Industrial Furnaces
Vent Systems
Accessories
Request for Quote
Distributor Search
- Industrial
Distributor Search
- Hobby
Specials
Product Resources
Site Map

Contact Us

 

Search Catalog :
GO
Use a (*) to broaden
your search results
  Products
All Categories > Industrial Furnaces > AE Dual Furnaces > View Items  

AE Dual Furnaces

Check up to five results to perform an action.


How To Select a Furnace

Uses: Designed for those who desire a large hardening furnace plus a separate furnace for tempering or drawing, all within a Minimum floor space. The two chambers allow for immediate tempering or drawing after quench without waiting for the hardening furnace to cool to the lower temperature required.

Controls: These furnaces come standard with two sets of individual digital programmable control and a digital high limit safety control. Solid state power switching to the heating elements. Each chamber is equipped with dual door limit safety switches that interrupt power to the elements when the door is opened. Fan stops when lower door is opened. (Note: door blocks view of the lower set of controls)

Elements: High temperature alloy wire elements are mounted in porcelain plates on the walls and floor and in grooves in the brick door, this provides all around heating and close gradients throughout the furnace chamber. A ceramic hearth plate covers the floor element.

General Construction: Furnace frame is constructed of heavy steel angle with 18 gauge sheet steel metal panels to form exterior case. Door of upper unit rises vertically and the door of the lower unit swings to the side. A Kaowool® rope seal is installed on the upper and lower doors where it meets the chamber for an inert protective atmosphere. A chrome refrigerator latch is used to hold the lower door closed. Lower unit is equipped with an stainless steel, centrifugal type fan to circulate the air and provide very close temperature gradients. The fan is operated by a 1 HP motor.




    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 4 of 4 1 

Item #

List Price

Upper Chamber Length

Lower Chamber Length

Overall Length

Overall Height

Max. Temperature Upper Chamber

Max. Temperature Lower Chamber

Input Power

AE1520D/PM4 $42,950.00 20 in 15 in 46 in 67 in 2250 ºF 1250 ºF 18 kW
AE1824D/PM4 $49,765.00 24 in 19 in 50 in 70 in 2250 ºF 1250 ºF 27 kW
AE1836D/PM4 $59,600.00 36 in 31 in 62 in 70 in 2250 ºF 1250 ºF 36 kW
AE1848D/PM4 $83,500.00 48 in 43 in 74 in 70 in 2250 ºF 1250 ºF 41 kW
  Results 1 - 4 of 4 1